As it turns out, prebuilds + devcontainers appear to already work
together. This PR has created a test that simulates a prebuild claim
happening to `agentcontainers.API`, to see how we handle it.
Listen to feedback that was missed in
https://github.com/coder/coder/pull/18346
- Adds `CODER_WORKSPACE_OWNER_NAME` into the agent environment.
- Logs warnings for when dev container app creation fails.
This change introduces a refactor of the devcontainers recreation logic
which is now handled asynchronously rather than being request scoped.
The response was consequently changed from "No Content" to "Accepted" to
reflect this.
A new `Status` field was introduced to the devcontainer struct which
replaces `Running` (bool). This reflects that the devcontainer can now
be in various states (starting, running, stopped or errored).
The status field also protects against multiple concurrent recrations,
as long as they are initiated via the API.
Updates #16424
Fixes a couple agent tests so that they work correctly on Windows.
`HOME` is not a standard Windows environment variable, and we don't have any specific Code in Coder to set it on SSH, so I've removed the test case. Amazingly/bizarrely the Windows test runners set this variable, but this is not standard Windows behavior so we shouldn't be including it in our tests.
Also the command `true` is not valid on a default Windows install.
```
true: The term 'true' is not recognized as a name of a cmdlet, function, script file, or executable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
```
I'm not really sure how the CI runners are allowing this test to pass, but again, it's not standard so we shouldn't be doing it.
fixes: https://github.com/coder/internal/issues/576
TestAgent_Lifecycle/ShutdownScriptOnce hits error logs which cause test
failures. These logs are legit errors and have to do with shutting down
the agent before it has fully come up.
This PR changes the test to wait for the agent to send stats (a good
indicator that it's fully up, and beyond the errors that have triggered
test failures in past) before closing it.
Fixes https://github.com/coder/internal/issues/564
The test is asserting too much, including stats guages that are not directly related to the thing we are trying to test: ConnectionCount, RxBytes, and TxBytes. I think the author assumed that these are counts that only go up, but they are guages and eventually zero back out, so there are race condtions where not all of them are non-zero at the same time.
This change adds support for devcontainer autostart in workspaces. The
preconditions for utilizing this feature are:
1. The `coder_devcontainer` resource must be defined in Terraform
2. By the time the startup scripts have completed,
- The `@devcontainers/cli` tool must be installed
- The given workspace folder must contain a devcontainer configuration
Example Terraform:
```tf
resource "coder_devcontainer" "coder" {
agent_id = coder_agent.main.id
workspace_folder = "/home/coder/coder"
config_path = ".devcontainer/devcontainer.json" # (optional)
}
```
Closes#16423
This change stes additional env vars. This is useful for programs that
assume their presence (for instance, Zed remote relies on SHELL).
See `man login`.
The experimental functions in `golang.org/x/exp/slices` are now
available in the standard library since Go 1.21.
Reference: https://go.dev/doc/go1.21#slices
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Fixes: https://github.com/coder/internal/issues/377
Added an additional SSH listener on port 22, so the agent now listens on both, port one and port 22.
---
Change-Id: Ifd986b260f8ac317e37d65111cd4e0bd1dc38af8
Signed-off-by: Thomas Kosiewski <tk@coder.com>
Builds on top of https://github.com/coder/coder/pull/16623/ and wires up
the ReconnectingPTY server. This does nothing to wire up the web
terminal yet but the added test demonstrates the functionality working.
Other changes:
* Refactors and moves the `SystemEnvInfo` interface to the
`agent/usershell` package to address follow-up from
https://github.com/coder/coder/pull/16623#discussion_r1967580249
* Marks `usershellinfo.Get` as deprecated. Consumers should use the
`EnvInfoer` interface instead.
---------
Co-authored-by: Mathias Fredriksson <mafredri@gmail.com>
Co-authored-by: Danny Kopping <danny@coder.com>
This change refactors the parsing of MagicSessionEnvs in the agentssh
package and moves the logic to an earlier stage. Also intoduces enums
for MagicSessionType.
Refs #15139
- Adds `testutil.GoleakOptions` and consolidates existing options to
this location
- Pre-emptively adds required ignore for this Dependabot PR to pass CI
https://github.com/coder/coder/pull/16066
- Integrates the `agentexec` pkg into the agent and removes the
legacy system of iterating over the process tree. It adds some linting
rules to hopefully catch future improper uses of `exec.Command` in the package.
Refactors our use of `slogtest` to instantiate a "standard logger" across most of our tests. This standard logger incorporates https://github.com/coder/slog/pull/217 to also ignore database query canceled errors by default, which are a source of low-severity flakes.
Any test that has set non-default `slogtest.Options` is left alone. In particular, `coderdtest` defaults to ignoring all errors. We might consider revisiting that decision now that we have better tools to target the really common flaky Error logs on shutdown.
Closes#14729
Expands the Coordination controller used by the CLI client to allow multiple tunnel destinations (agents). Our current client uses just one, but this unifies the logic so that when we add Coder VPN, 1 is just a special case of "many."
chore of #14729
Refactors the `ServerTailnet` to use `tailnet.Controller` so that we reuse logic around reconnection and handling control messages, instead of reimplementing. This unifies our "client" use of the tailscale API across CLI, coderd, and wsproxy.
Refactors the way clients of the Tailnet API (clients of the API, which include both workspace "agents" and "clients") interact with the API. Introduces the idea of abstract "controllers" for each of the RPCs in the API, and implements a Coordination controller by refactoring from `workspacesdk`.
chore re: #14729
fixes#14715
Configures agents to use an address both in the Tailscale service prefix and the new Coder service prefix. Also modifies the Coordinator auth to allow the new prefix.
Updates `coder/tailscale` to include https://github.com/coder/tailscale/pull/62 which fixes a bug around forwarding TCP connections to localhost. This functionality is tested in the modifications to `TestAgent_Dial`.
re: #14715
This PR introduces the Coder service prefix: `fd60:627a:a42b::/48` and refactors our existing code as calling the Tailscale service prefix explicitly (rather than implicitly).
Removes the unused `Addresses` agent option. All clients today assume they can compute the Agent's IP address based on its UUID, so an agent started with a custom address would break things.
* feat: begin impl of agent script timings
* feat: add job_id and display_name to script timings
* fix: increment migration number
* fix: rename migrations from 251 to 254
* test: get tests compiling
* fix: appease the linter
* fix: get tests passing again
* fix: drop column from correct table
* test: add fixture for agent script timings
* fix: typo
* fix: use job id used in provisioner job timings
* fix: increment migration number
* test: behaviour of script runner
* test: rewrite test
* test: does exit 1 script break things?
* test: rewrite test again
* fix: revert change
Not sure how this came to be, I do not recall manually changing
these files.
* fix: let code breathe
* fix: wrap errors
* fix: justify nolint
* fix: swap require.Equal argument order
* fix: add mutex operations
* feat: add 'ran_on_start' and 'blocked_login' fields
* fix: update testdata fixture
* fix: refer to agent_id instead of job_id in timings
* fix: JobID -> AgentID in dbauthz_test
* fix: add 'id' to scripts, make timing refer to script id
* fix: fix broken tests and convert bug
* fix: update testdata fixtures
* fix: update testdata fixtures again
* feat: capture stage and if script timed out
* fix: update migration number
* test: add test for script api
* fix: fake db query
* fix: use UTC time
* fix: ensure r.scriptComplete is not nil
* fix: move err check to right after call
* fix: uppercase sql
* fix: use dbtime.Now()
* fix: debug log on r.scriptCompleted being nil
* fix: ensure correct rbac permissions
* chore: remove DisplayName
* fix: get tests passing
* fix: remove space in sql up
* docs: document ExecuteOption
* fix: drop 'RETURNING' from sql
* chore: remove 'display_name' from timing table
* fix: testdata fixture
* fix: put r.scriptCompleted call in goroutine
* fix: track goroutine for test + use separate context for reporting
* fix: appease linter, handle trackCommandGoroutine error
* fix: resolve race condition
* feat: replace timed_out column with status column
* test: update testdata fixture
* fix: apply suggestions from review
* revert: linter changes
Fixes#12560
When gracefully disconnecting from the coordinator, we would send the Disconnect message and then close the dRPC stream. However, closing the dRPC stream can cause the server not to process the Disconnect message, since we use the stream context in a `select` while sending it to the coordinator.
This is a product bug uncovered by the flake, and probably results in us failing graceful disconnect some minority of the time.
Instead, the `remoteCoordination` (and `inMemoryCoordination` for consistency) should send the Disconnect message and then wait for the coordinator to hang up (on some graceful disconnect timer, in the form of a context).
Currently, importing `codersdk` just to interact with the API requires
importing tailscale, which causes builds to fail unless manually using
our fork.
Changes the agent to use the new v2 API for sending logs, via the logSender component.
We keep the PatchLogs function around, but deprecate it so that we can test the v1 endpoint.
Danielle Maywood