Thanks to the great work in #20393, we’ve successfully introduced
offset-based pagination for this endpoint. However, the frontend expects
a `count` field in the response rather than `total`. This PR updates the
response payload to rename the returned key to `count` for consistency
with frontend expectations and existing API patterns.
This is necessary to unblock the work in #20331
- Adds FK from `aibridge_interceptions.initiator_id` to `users.id`
- This is enforced by deleting any rows that don't have any users. Since
this is an experimental feature AND coder never deletes user rows I
think this is acceptable.
- Adds `name` as a property on `codersdk.MinimalUser`
- This matches the `visible_users` view in the database. I'm unsure why
`name` wasn't already included given that `username` is.
- Adds a new `initiator` field to `codersdk.AIBridgeInterception` which
contains `codersdk.MinimalUser` (ID, username, name, avatar URL)
- Removes `initiator_id` from `codersdk.AIBridgeInterception`
- Should be fine since we're still in early access
The tenv linter is deprecated in favor of usetesting which offers a
superset of lint checks. This message is seen when running `make lint`
```
[nix-shell:~/src/coder]$ make lint
<snip>
WARN The linter 'tenv' is deprecated (since v1.64.0) due to: Duplicate feature in another linter. Replaced by usetesting.
<snip>
```
This change swaps out the deprecated tenv linter for the usetesting linter,
and configures it for linting parity.
https://github.com/coder/coder/issues/20398
The authz recorder is causing a lot of memory to be allocated, and is a
memory leak for websocket connections.
This change makes it opt-in on a per request basis (ontop of `isDev`).
To get the authz headers, use `Copy as cURL` on chrome and append the
header `x-authz-checks=true`.
Necessary for the frontend to be able to paginate easily. Cursor
pagination is good for fetching all events, but doesn't play very well
when a pagination component gets involved.
Adds support for `?offset=x` to the existing endpoint. The cursor-based
pagination (`?after_id=x`) is still supported. The two pagination modes
are mutually exclusive, and are documented as such. If both are
supplied, the request will be rejected.
Also adds a `total` property to the response that contains the full
count of items matching the filter. We already have indices in place so
I don't think this will impact performance (or we can revisit it before
GA).
Adds the following debug routes for people with the `debug_info:read`
permission:
- `/api/v2/debug/pprof` for `net/http/pprof`
- `/`
- `/cmdline`
- `/profile`
- `/symbol`
- `/trace`
- `/*`
- `/api/v2/debug/metrics` for Prometheus metrics
aid in differentiation between sources of calls to `GetWorkspaces` but introducing new queries for metrics specific use cases
---------
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Fixes https://github.com/coder/internal/issues/1067
- Adds `WorkspaceAgentWaiter.WithContext()`
- Updates usage of `WorkspaceAgentWaiter` in `aitasks_test.go` with
context bumped to `testutil.WaitMedium`
Authored by Claude with manual review and updates.
Disclaimer: Claude did all of this, reviewed and committed by me.
I find the "task is working" notification straight after creation to be
unnecessary.
Added logic to skip the notification if the first app status is
"working".
- Ignore errors when reporting a connection from the server, just log
them instead
- Translate connection log IP `localhost` to `127.0.0.1` on both the
server and the agent
Note that the temporary fix for converting invalid IPs to localhost is
not required in main since the database no longer forbids NULL for the
IP column since https://github.com/coder/coder/pull/19788
Relates to #20194
This change ensures task names are unique per user the same way we do
for workspaces. This ensures we don't create tasks that are impossible
to start due to another task being named the same creating a workspace
name conflict.
Updates coder/internal#948
Supersedes coder/coder#20212
This change updates the `task_workspace_apps` table structure for
improved linking to workspace builds and adds queries to manage tasks
and a view to expose task status.
Updates coder/internal#948
Supersedes coder/coder#20212
Supersedes coder/coder#19773
fixes https://github.com/coder/internal/issues/1026
Thru a (perhaps too-) clever hack of `init()` functions, I've managed to remove the need to separately compile the cleaner binary. This should fix the flakes we are seeing were the binary compilation takes 10s of seconds on macOS. The cleaner is encorporated directly into the test binary and we self-exec as the subprocess.
In preparation for adding the "member" permission level, which will also
be grouped by org ID, do a bit of a refactor to make room for it and the
existing "org" level to live in the same `map`
# Add API key allow_list for resource-scoped tokens
This PR adds support for API key allow lists, enabling tokens to be scoped to specific resources. The implementation:
1. Adds a new `allow_list` field to the `CreateTokenRequest` struct, allowing clients to specify resource-specific scopes when creating API tokens
2. Implements `APIAllowListTarget` type to represent resource targets in the format `<type>:<id>` with support for wildcards
3. Adds validation and normalization logic for allow lists to handle wildcards and deduplication
4. Integrates with RBAC by creating an `APIKeyEffectiveScope` that merges API key scopes with allow list restrictions
5. Updates API documentation and TypeScript types to reflect the new functionality
This feature enables creating tokens that are limited to specific resources (like workspaces or templates) by ID, making it possible to create more granular API tokens with limited access.
Closes https://github.com/coder/internal/issues/978
- Introduce `CODER_TASK_ID` and `CODER_TASK_PROMPT` to the provisioner
environment
- Make use of new `app_id` field in provider, with a fallback to
`sidebar_app.id` for backwards compatibility
**For now** I've left the `taskPrompt` and `taskID` as a TODO as we do
not yet create these values.
relates to: https://github.com/coder/internal/issues/1026
On POSIX systems (macOS and Linux) we compile the dbcleaner binary into a temp directory. This allows us to explicitly separate the compilation step and report the time it takes. We suspect this might be a contributing factor in the above linked flakes we see on macOS.
This doesn't work on Windows because Go tests clean up the temp directory at the end of the test and the dbcleaner binary will still be executing. On Windows you cannot delete a file being executed nor the directory. However, we are not seeing any flakes on Windows so the old behavior seems to be OK.
The prebuilds user never initiates a workspace claim autonomously. A
claim can only happen when a user attempts to create a workspace. When
listing prebuild provisioner jobs, it would not make sense to see jobs
related to users who are creating workspaces and have gotten a prebuilt
workspace. When cleaning up an overwhelmed provisioner queue, we should
not delete claims as they have humans waiting for them and are not part
of the thundering herd.
Therefore, this PR ensures that provisioner jobs that claim workspaces
are considered to be initiated by the user, not the prebuilds system.
Reverts coder/coder#20181
I realized we don’t need this in the task response. When loading a task,
we already need much more workspace information, so it makes more sense
to fetch the workspace data separately instead of trying to embed all
its details into the response.
I think we can keep the task response clean and focused on the essential
information needed to list tasks. For more specific details, we can
fetch the related resources as needed. So, I’m reverting this PR.
In https://github.com/coder/coder/pull/20137, we added a new flag to
`coder provisioner jobs list`, namely `--initiator`.
To make some follow-up worth it, I need to rename an API param used in
the process before it becomes part of our released and tagged API.
Instead of only accepting UUIDs, we accept an arbitrary string.
We still validate it as a UUID now, but we will expand its validation to
allow any string and then resolve that string the same way that we
resolve the user parameter elsewhere in the API.
Mathias Fredriksson