feat(claude-code): add managed_settings input for policy delivery via /etc/claude-code (#863)

## Problem

The module configures Claude Code's permission posture by reaching
around the permission system rather than through it:

- `scripts/install.sh` writes `bypassPermissionsModeAccepted`,
`autoModeAccepted`, and `primaryApiKey` directly into the user-writable
`~/.claude.json`. Any process in the workspace can read the API key or
flip the acceptance flags back.
- `scripts/start.sh` adds `--dangerously-skip-permissions` to every task
launch, even when the template author set an explicit `permission_mode`.
The README has to carry a security warning telling people the module
bypasses permission checks.
- `permission_mode`, `allowed_tools`, and `disallowed_tools` each plumb
through a different ad-hoc path (CLI flag, `coder` subcommand) instead
of a single policy surface.

## Change

Add a `managed_settings` input that renders to
`/etc/claude-code/managed-settings.d/10-coder.json`. Claude Code reads
that drop-in directory at startup with the highest configuration
precedence (above `~/.claude/settings.json` and project settings), so
template authors get an admin-controlled policy file that users inside
the workspace cannot override. The mechanism is a local file read with
no API call, so it works identically for the Anthropic API, AWS Bedrock,
Google Vertex AI, and AI Bridge / AI Gateway.

```hcl
managed_settings = {
  permissions = {
    defaultMode                  = "acceptEdits"
    disableBypassPermissionsMode = "disable"
    deny                         = ["Bash(curl:*)", "WebFetch"]
  }
}
```

Supporting changes:

- `install.sh` writes the policy file (root-owned, 0644) and stops
writing `bypassPermissionsModeAccepted`, `autoModeAccepted`, and
`primaryApiKey` into `~/.claude.json`. The API key is already exported
via `coder_env` as `CLAUDE_API_KEY`; duplicating it on disk is
unnecessary. `hasCompletedOnboarding` stays because there is no env-var
alternative for it.
- `start.sh` only adds `--dangerously-skip-permissions` for tasks when
no explicit `permission_mode` is set (same fix as #846; included here so
this PR is self-contained, happy to drop if #846 lands first).
- `permission_mode`, `allowed_tools`, and `disallowed_tools` are marked
deprecated and shimmed into `managed_settings.permissions` for one
release when `managed_settings` is not provided.
- README security warning rewritten to point at the policy mechanism
instead of telling people the module is unsafe by design.

## Relationship to #861

#861 strips this module to install-and-configure and removes
`permission_mode` / `allowed_tools` / `disallowed_tools` outright.
`managed_settings` is the natural replacement for those: it is
install-time (survives the `start.sh` removal), it covers everything the
dropped variables did plus `hooks`, `env`, `model`, `apiKeyHelper`, and
the rest of the settings schema, and it does not require the module to
know anything about how Claude is launched. If #861 lands first I will
rebase this on top and drop the deprecation shim and the `start.sh`
hunk.

## Validation

- `terraform fmt` / `terraform validate` clean
- New tests: `claude-managed-settings-written`,
`claude-managed-settings-legacy-shim`,
`claude-no-policy-keys-in-claudejson`, plus an assertion in
`claude-auto-permission-mode` that `--dangerously-skip-permissions` is
absent when a mode is set
- Manually verified `/etc/claude-code/managed-settings.d/*.json`
precedence in the Claude Code CLI source

Closes #818. Relates to #284, #846, #861.

Disclosure: I work at Anthropic on the Claude Code team. Happy to adjust
scope or split this further if that is easier to review.

---------

Co-authored-by: DevCats <chris@dualriver.com>
Co-authored-by: DevCats <christofer@coder.com>

registry/coder-labs/modules/gemini/README.md

@@ -13,7 +13,7 @@ Run [Gemini CLI](https://github.com/google-gemini/gemini-cli) in your workspace
 ```tf
 module "gemini" {
   source   = "registry.coder.com/coder-labs/gemini/coder"
-  version  = "3.0.0"
+  version  = "3.0.1"
   agent_id = coder_agent.main.id
   folder   = "/home/coder/project"
 }
@@ -46,7 +46,7 @@ variable "gemini_api_key" {
 
 module "gemini" {
   source         = "registry.coder.com/coder-labs/gemini/coder"
-  version        = "3.0.0"
+  version        = "3.0.1"
   agent_id       = coder_agent.main.id
   gemini_api_key = var.gemini_api_key
   folder         = "/home/coder/project"
@@ -94,7 +94,7 @@ data "coder_parameter" "ai_prompt" {
 module "gemini" {
   count                = data.coder_workspace.me.start_count
   source               = "registry.coder.com/coder-labs/gemini/coder"
-  version              = "3.0.0"
+  version              = "3.0.1"
   agent_id             = coder_agent.main.id
   gemini_api_key       = var.gemini_api_key
   gemini_model         = "gemini-2.5-flash"
@@ -105,6 +105,22 @@ module "gemini" {
     You are a helpful coding assistant. Always explain your code changes clearly.
     YOU MUST REPORT ALL TASKS TO CODER.
   EOT
+  pre_install_script   = <<-EOT
+    #!/bin/bash
+    set -e
+
+    echo "Installing Node.js via NodeSource..."
+
+    sudo apt-get update -qq && sudo apt-get install -y curl ca-certificates
+
+    curl -fsSL https://deb.nodesource.com/setup_lts.x | sudo bash -
+
+    sudo apt-get install -y nodejs
+
+    echo "Node version: $(node -v)"
+    echo "npm version: $(npm -v)"
+    echo "Node install complete."
+  EOT
 }
 ```
 
@@ -118,7 +134,7 @@ For enterprise users who prefer Google's Vertex AI platform:
 ```tf
 module "gemini" {
   source         = "registry.coder.com/coder-labs/gemini/coder"
-  version        = "3.0.0"
+  version        = "3.0.1"
   agent_id       = coder_agent.main.id
   gemini_api_key = var.gemini_api_key
   folder         = "/home/coder/project"

registry/coder-labs/modules/gemini/main.tf

@@ -148,22 +148,16 @@ locals {
   base_extensions = <<-EOT
 {
   "coder": {
+    "command": "coder",
     "args": [
       "exp",
       "mcp",
       "server"
     ],
-    "command": "coder",
-    "description": "Report ALL tasks and statuses (in progress, done, failed) you are working on.",
-    "enabled": true,
     "env": {
       "CODER_MCP_APP_STATUS_SLUG": "${local.app_slug}",
       "CODER_MCP_AI_AGENTAPI_URL": "http://localhost:3284"
-    },
-    "name": "Coder",
-    "timeout": 3000,
-    "type": "stdio",
-    "trust": true
+    }
   }
 }
 EOT

registry/coder-labs/modules/gemini/scripts/install.sh

@@ -17,6 +17,7 @@ echo "--------------------------------"
 printf "gemini_config: %s\n" "$ARG_GEMINI_CONFIG"
 printf "install: %s\n" "$ARG_INSTALL"
 printf "gemini_version: %s\n" "$ARG_GEMINI_VERSION"
+printf "BASE_EXTENSIONS: %s\n" "$BASE_EXTENSIONS"
 echo "--------------------------------"
 
 set +o nounset
@@ -140,6 +141,25 @@ function add_system_prompt_if_exists() {
   fi
 }
 
+function patch_coder_mcp_command() {
+  CODER_BIN=$(which coder)
+  SETTINGS_PATH="$HOME/.gemini/settings.json"
+
+  if [ -z "$CODER_BIN" ]; then
+    printf "Warning: could not find coder binary, MCP command path not patched.\n"
+    return
+  fi
+
+  printf "Patching coder MCP command path to: %s\n" "$CODER_BIN"
+
+  TMP_SETTINGS=$(mktemp)
+  jq --arg bin "$CODER_BIN" \
+    '.mcpServers.coder.command = $bin' \
+    "$SETTINGS_PATH" > "$TMP_SETTINGS" && mv "$TMP_SETTINGS" "$SETTINGS_PATH"
+
+  printf "Patch complete.\n"
+}
+
 function configure_mcp() {
   export CODER_MCP_APP_STATUS_SLUG="gemini"
   export CODER_MCP_AI_AGENTAPI_URL="http://localhost:3284"
@@ -149,4 +169,5 @@ function configure_mcp() {
 install_gemini
 populate_settings_json
 add_system_prompt_if_exists
+patch_coder_mcp_command
 configure_mcp

registry/coder/modules/agent-firewall/README.md

@@ -0,0 +1,146 @@
+---
+display_name: Agent Firewall
+description: Configures agent-firewall for network isolation in Coder workspaces
+icon: ../../../../.icons/coder.svg
+verified: true
+tags: [agent-firewall, ai, agents, firewall, boundary]
+---
+
+# Agent Firewall
+
+Installs [agent-firewall](https://coder.com/docs/ai-coder/agent-firewall) for network isolation in Coder workspaces.
+
+This module:
+
+- Installs agent-firewall (via coder subcommand, direct installation, or compilation from source)
+- Creates a wrapper script at `$HOME/.coder-modules/coder/agent-firewall/scripts/agent-firewall-wrapper.sh`
+- Writes a [default agent-firewall config](https://github.com/coder/registry/blob/main/registry/coder/modules/agent-firewall/config.yaml.tftpl) to `$HOME/.coder-modules/coder/agent-firewall/config/config.yaml` (customizable)
+- Provides the wrapper path, config path, and script names via outputs
+- Uses coder-utils and output `scripts` for synchronization. https://registry.coder.com/modules/coder/coder-utils?tab=outputs
+
+```tf
+module "agent-firewall" {
+  source   = "registry.coder.com/coder/agent-firewall/coder"
+  version  = "0.0.1"
+  agent_id = coder_agent.main.id
+}
+```
+
+## Examples
+
+Use the `agent_firewall_wrapper_path` output to access the wrapper path and `agent_firewall_config_path` to access config path in Terraform and pass it to scripts that should run commands in network isolation.
+
+### With Claude Code
+
+Use agent-firewall alongside the `claude-code` module to run Claude in a
+network-isolated environment.
+
+#### As an automated task
+
+```tf
+module "agent-firewall" {
+  source   = "registry.coder.com/coder/agent-firewall/coder"
+  version  = "0.0.1"
+  agent_id = coder_agent.main.id
+}
+
+resource "coder_script" "claude_with_agent_firewall" {
+  agent_id     = coder_agent.main.id
+  display_name = "Claude (Agent Firewall)"
+  run_on_start = true
+  script       = <<-EOT
+    #!/bin/bash
+    set -e
+    coder exp sync want claude-agent-firewall \
+      ${join(" ", module.agent-firewall.scripts)} \
+      ${join(" ", module.claude-code.scripts)}
+    coder exp sync start claude-agent-firewall
+  "${module.agent-firewall.agent_firewall_wrapper_path}" --config="${module.agent-firewall.agent_firewall_config_path}" -- claude -p "Fix issue #840 from coder/coder"
+  EOT
+}
+```
+
+#### As a Coder app
+
+```tf
+module "agent-firewall" {
+  source   = "registry.coder.com/coder/agent-firewall/coder"
+  version  = "0.0.1"
+  agent_id = coder_agent.main.id
+}
+
+resource "coder_app" "claude_with_agent_firewall" {
+  agent_id     = coder_agent.main.id
+  display_name = "Claude Code"
+  slug         = "claude-code"
+  command      = <<-EOT
+    #!/bin/bash
+    set -e
+    exec tmux new-session -A -s claude-code \
+      '"${module.agent-firewall.agent_firewall_wrapper_path}" --config="${module.agent-firewall.agent_firewall_config_path}" -- claude'
+  EOT
+}
+```
+
+## Configuration
+
+The module ships with a comprehensive default config based on the
+[Coder dogfood allowlist](https://github.com/coder/coder/blob/main/dogfood/coder/boundary-config.yaml). It covers Anthropic services,
+OpenAI services, version control, package managers, container registries,
+cloud platforms, and common development tools.
+
+The Coder deployment domain is automatically added to the allowlist using
+`data.coder_workspace.me.access_url`.
+
+By default the config is written to
+`$HOME/.coder-modules/coder/agent-firewall/config/config.yaml`. You can
+access the resolved path via the `agent_firewall_config_path` output. Override
+it in two ways:
+
+### Inline config
+
+Pass the full YAML content directly:
+
+```tf
+module "agent-firewall" {
+  source   = "registry.coder.com/coder/agent-firewall/coder"
+  version  = "0.0.1"
+  agent_id = coder_agent.main.id
+
+  agent_firewall_config = <<-YAML
+    allowlist:
+      - domain=your-deployment.coder.com
+      - domain=api.anthropic.com
+      - domain=api.openai.com
+    log_dir: /tmp/agent_firewall_logs
+    proxy_port: 8087
+    log_level: warn
+  YAML
+}
+```
+
+### External config file
+
+Point to an existing config file in the workspace. The module will not
+write any config and the `agent_firewall_config_path` output will point to
+your path. The file must exist on disk before agent-firewall starts.
+
+```tf
+module "agent-firewall" {
+  source   = "registry.coder.com/coder/agent-firewall/coder"
+  version  = "0.0.1"
+  agent_id = coder_agent.main.id
+
+  agent_firewall_config_path = "/workspace/my-agent-firewall-config.yaml"
+}
+```
+
+> **Note:** `agent_firewall_config` and `agent_firewall_config_path` are mutually
+> exclusive, setting both produces a validation error.
+
+See the [Agent Firewall docs](https://coder.com/docs/ai-coder/agent-firewall)
+for the full config reference.
+
+## References
+
+- [Agent Firewall Documentation](https://coder.com/docs/ai-coder/agent-firewall)

registry/coder/modules/agent-firewall/agent-firewall.tftest.hcl

@@ -0,0 +1,157 @@
+# Test for agent-firewall module
+
+run "plan_with_required_vars" {
+  command = plan
+
+  variables {
+    agent_id = "test-agent-id"
+  }
+
+  # Verify the agent_firewall_wrapper_path output
+  assert {
+    condition     = output.agent_firewall_wrapper_path == "$HOME/.coder-modules/coder/agent-firewall/scripts/agent-firewall-wrapper.sh"
+    error_message = "agent_firewall_wrapper_path output should be correct"
+  }
+
+  # Verify agent_firewall_config_path output defaults to the managed path
+  assert {
+    condition     = output.agent_firewall_config_path == "$HOME/.coder-modules/coder/agent-firewall/config/config.yaml"
+    error_message = "agent_firewall_config_path output should default to managed config path"
+  }
+
+  # Verify the scripts output contains the install script name
+  assert {
+    condition     = contains(output.scripts, "coder-agent-firewall-install_script")
+    error_message = "scripts should contain the install script name"
+  }
+}
+
+run "plan_with_compile_from_source" {
+  command = plan
+
+  variables {
+    agent_id                           = "test-agent-id"
+    compile_agent_firewall_from_source = true
+    agent_firewall_version             = "main"
+  }
+
+  assert {
+    condition     = output.agent_firewall_wrapper_path == "$HOME/.coder-modules/coder/agent-firewall/scripts/agent-firewall-wrapper.sh"
+    error_message = "agent_firewall_wrapper_path output should be correct"
+  }
+
+  assert {
+    condition     = contains(output.scripts, "coder-agent-firewall-install_script")
+    error_message = "scripts should contain the install script name"
+  }
+}
+
+run "plan_with_use_directly" {
+  command = plan
+
+  variables {
+    agent_id                    = "test-agent-id"
+    use_agent_firewall_directly = true
+    agent_firewall_version      = "latest"
+  }
+
+  assert {
+    condition     = output.agent_firewall_wrapper_path == "$HOME/.coder-modules/coder/agent-firewall/scripts/agent-firewall-wrapper.sh"
+    error_message = "agent_firewall_wrapper_path output should be correct"
+  }
+
+  assert {
+    condition     = contains(output.scripts, "coder-agent-firewall-install_script")
+    error_message = "scripts should contain the install script name"
+  }
+}
+
+run "plan_with_custom_hooks" {
+  command = plan
+
+  variables {
+    agent_id            = "test-agent-id"
+    pre_install_script  = "echo 'Before install'"
+    post_install_script = "echo 'After install'"
+  }
+
+  assert {
+    condition     = contains(output.scripts, "coder-agent-firewall-install_script")
+    error_message = "scripts should contain the install script name"
+  }
+
+  # Verify pre and post install script names are set
+  assert {
+    condition     = contains(output.scripts, "coder-agent-firewall-pre_install_script")
+    error_message = "scripts should contain the pre_install script name"
+  }
+
+  assert {
+    condition     = contains(output.scripts, "coder-agent-firewall-post_install_script")
+    error_message = "scripts should contain the post_install script name"
+  }
+}
+
+run "plan_with_custom_module_directory" {
+  command = plan
+
+  variables {
+    agent_id         = "test-agent-id"
+    module_directory = "$HOME/.coder-modules/custom/agent-firewall"
+  }
+
+  assert {
+    condition     = output.agent_firewall_wrapper_path == "$HOME/.coder-modules/custom/agent-firewall/scripts/agent-firewall-wrapper.sh"
+    error_message = "agent_firewall_wrapper_path output should use custom module directory"
+  }
+
+  # Config path should also follow the module directory
+  assert {
+    condition     = output.agent_firewall_config_path == "$HOME/.coder-modules/custom/agent-firewall/config/config.yaml"
+    error_message = "agent_firewall_config_path output should use custom module directory"
+  }
+}
+
+run "plan_with_inline_config" {
+  command = plan
+
+  variables {
+    agent_id              = "test-agent-id"
+    agent_firewall_config = "allowlist:\n  - domain=example.com\nlog_level: debug\n"
+  }
+
+  # Inline config should still point to the managed path.
+  assert {
+    condition     = output.agent_firewall_config_path == "$HOME/.coder-modules/coder/agent-firewall/config/config.yaml"
+    error_message = "agent_firewall_config_path output should point to managed config path"
+  }
+}
+
+run "plan_with_config_path" {
+  command = plan
+
+  variables {
+    agent_id                   = "test-agent-id"
+    agent_firewall_config_path = "/workspace/my-boundary-config.yaml"
+  }
+
+  # agent_firewall_config_path output should point to the user-provided path.
+  assert {
+    condition     = output.agent_firewall_config_path == "/workspace/my-boundary-config.yaml"
+    error_message = "agent_firewall_config_path output should point to user-provided path"
+  }
+}
+
+run "plan_with_both_configs_should_fail" {
+  command = plan
+
+  variables {
+    agent_id                   = "test-agent-id"
+    agent_firewall_config      = "allowlist: []"
+    agent_firewall_config_path = "/workspace/config.yaml"
+  }
+
+  expect_failures = [
+    var.agent_firewall_config,
+  ]
+}

registry/coder/modules/agent-firewall/config.yaml.tftpl

@@ -0,0 +1,218 @@
+allowlist:
+  - domain=${CODER_DOMAIN}
+
+  # Anthropic Services
+  - domain=api.anthropic.com
+  - domain=statsig.anthropic.com
+  - domain=claude.ai
+
+  # OpenAI Services
+  - domain=api.openai.com
+  - domain=platform.openai.com
+  - domain=openai.com
+  - domain=chatgpt.com
+  - domain=*.oaiusercontent.com
+  - domain=*.oaistatic.com
+
+  # Version Control
+  - domain=github.com
+  - domain=www.github.com
+  - domain=api.github.com
+  - domain=raw.githubusercontent.com
+  - domain=objects.githubusercontent.com
+  - domain=codeload.github.com
+  - domain=avatars.githubusercontent.com
+  - domain=camo.githubusercontent.com
+  - domain=gist.github.com
+  - domain=gitlab.com
+  - domain=www.gitlab.com
+  - domain=registry.gitlab.com
+  - domain=bitbucket.org
+  - domain=www.bitbucket.org
+  - domain=api.bitbucket.org
+
+  # Container Registries
+  - domain=registry-1.docker.io
+  - domain=auth.docker.io
+  - domain=index.docker.io
+  - domain=hub.docker.com
+  - domain=www.docker.com
+  - domain=production.cloudflare.docker.com
+  - domain=download.docker.com
+  - domain=*.gcr.io
+  - domain=ghcr.io
+  - domain=mcr.microsoft.com
+  - domain=*.data.mcr.microsoft.com
+
+  # Cloud Platforms
+  - domain=cloud.google.com
+  - domain=accounts.google.com
+  - domain=gcloud.google.com
+  - domain=*.googleapis.com
+  - domain=storage.googleapis.com
+  - domain=compute.googleapis.com
+  - domain=container.googleapis.com
+  - domain=azure.com
+  - domain=portal.azure.com
+  - domain=microsoft.com
+  - domain=www.microsoft.com
+  - domain=*.microsoftonline.com
+  - domain=packages.microsoft.com
+  - domain=dotnet.microsoft.com
+  - domain=dot.net
+  - domain=visualstudio.com
+  - domain=dev.azure.com
+  - domain=oracle.com
+  - domain=www.oracle.com
+  - domain=java.com
+  - domain=www.java.com
+  - domain=java.net
+  - domain=www.java.net
+  - domain=download.oracle.com
+  - domain=yum.oracle.com
+
+  # Package Managers - JavaScript/Node
+  - domain=registry.npmjs.org
+  - domain=www.npmjs.com
+  - domain=www.npmjs.org
+  - domain=npmjs.com
+  - domain=npmjs.org
+  - domain=yarnpkg.com
+  - domain=registry.yarnpkg.com
+
+  # Package Managers - Python
+  - domain=pypi.org
+  - domain=www.pypi.org
+  - domain=files.pythonhosted.org
+  - domain=pythonhosted.org
+  - domain=test.pypi.org
+  - domain=pypi.python.org
+  - domain=pypa.io
+  - domain=www.pypa.io
+
+  # Package Managers - Ruby
+  - domain=rubygems.org
+  - domain=www.rubygems.org
+  - domain=api.rubygems.org
+  - domain=index.rubygems.org
+  - domain=ruby-lang.org
+  - domain=www.ruby-lang.org
+  - domain=rubyforge.org
+  - domain=www.rubyforge.org
+  - domain=rubyonrails.org
+  - domain=www.rubyonrails.org
+  - domain=rvm.io
+  - domain=get.rvm.io
+
+  # Package Managers - Rust
+  - domain=crates.io
+  - domain=www.crates.io
+  - domain=static.crates.io
+  - domain=rustup.rs
+  - domain=static.rust-lang.org
+  - domain=www.rust-lang.org
+
+  # Package Managers - Go
+  - domain=proxy.golang.org
+  - domain=sum.golang.org
+  - domain=index.golang.org
+  - domain=golang.org
+  - domain=www.golang.org
+  - domain=go.dev
+  - domain=dl.google.com
+  - domain=goproxy.io
+  - domain=pkg.go.dev
+
+  # Package Managers - JVM
+  - domain=maven.org
+  - domain=repo.maven.org
+  - domain=central.maven.org
+  - domain=repo1.maven.org
+  - domain=jcenter.bintray.com
+  - domain=gradle.org
+  - domain=www.gradle.org
+  - domain=services.gradle.org
+  - domain=spring.io
+  - domain=repo.spring.io
+
+  # Package Managers - Other Languages
+  - domain=packagist.org
+  - domain=www.packagist.org
+  - domain=repo.packagist.org
+  - domain=nuget.org
+  - domain=www.nuget.org
+  - domain=api.nuget.org
+  - domain=pub.dev
+  - domain=api.pub.dev
+  - domain=hex.pm
+  - domain=www.hex.pm
+  - domain=cpan.org
+  - domain=www.cpan.org
+  - domain=metacpan.org
+  - domain=www.metacpan.org
+  - domain=api.metacpan.org
+  - domain=cocoapods.org
+  - domain=www.cocoapods.org
+  - domain=cdn.cocoapods.org
+  - domain=haskell.org
+  - domain=www.haskell.org
+  - domain=hackage.haskell.org
+  - domain=swift.org
+  - domain=www.swift.org
+
+  # Linux Distributions
+  - domain=archive.ubuntu.com
+  - domain=security.ubuntu.com
+  - domain=ubuntu.com
+  - domain=www.ubuntu.com
+  - domain=*.ubuntu.com
+  - domain=ppa.launchpad.net
+  - domain=launchpad.net
+  - domain=www.launchpad.net
+
+  # Development Tools & Platforms
+  - domain=dl.k8s.io
+  - domain=pkgs.k8s.io
+  - domain=k8s.io
+  - domain=www.k8s.io
+  - domain=releases.hashicorp.com
+  - domain=apt.releases.hashicorp.com
+  - domain=rpm.releases.hashicorp.com
+  - domain=archive.releases.hashicorp.com
+  - domain=hashicorp.com
+  - domain=www.hashicorp.com
+  - domain=repo.anaconda.com
+  - domain=conda.anaconda.org
+  - domain=anaconda.org
+  - domain=www.anaconda.com
+  - domain=anaconda.com
+  - domain=continuum.io
+  - domain=apache.org
+  - domain=www.apache.org
+  - domain=archive.apache.org
+  - domain=downloads.apache.org
+  - domain=eclipse.org
+  - domain=www.eclipse.org
+  - domain=download.eclipse.org
+  - domain=nodejs.org
+  - domain=www.nodejs.org
+
+  # Cloud Services & Monitoring
+  - domain=statsig.com
+  - domain=www.statsig.com
+  - domain=api.statsig.com
+  - domain=*.sentry.io
+
+  # Content Delivery & Mirrors
+  - domain=*.sourceforge.net
+  - domain=packagecloud.io
+  - domain=*.packagecloud.io
+
+  # Schema & Configuration
+  - domain=json-schema.org
+  - domain=www.json-schema.org
+  - domain=json.schemastore.org
+  - domain=www.schemastore.org
+log_dir: ${BOUNDARY_LOG_DIR}
+log_level: warn
+proxy_port: 8087

registry/coder/modules/agent-firewall/main.test.ts

@@ -0,0 +1,376 @@
+import {
+  test,
+  afterEach,
+  describe,
+  setDefaultTimeout,
+  beforeAll,
+  expect,
+} from "bun:test";
+import {
+  execContainer,
+  readFileContainer,
+  runTerraformInit,
+  runTerraformApply,
+  testRequiredVariables,
+  runContainer,
+  removeContainer,
+} from "~test";
+import {
+  loadTestFile,
+  writeExecutable,
+  execModuleScript,
+  extractCoderEnvVars,
+} from "../agentapi/test-util";
+
+let cleanupFunctions: (() => Promise<void>)[] = [];
+const registerCleanup = (cleanup: () => Promise<void>) => {
+  cleanupFunctions.push(cleanup);
+};
+afterEach(async () => {
+  const cleanupFnsCopy = cleanupFunctions.slice().reverse();
+  cleanupFunctions = [];
+  for (const cleanup of cleanupFnsCopy) {
+    try {
+      await cleanup();
+    } catch (error) {
+      console.error("Error during cleanup:", error);
+    }
+  }
+});
+
+interface SetupProps {
+  moduleVariables?: Record<string, string>;
+  skipCoderMock?: boolean;
+}
+
+const MODULE_DIR = "/home/coder/.coder-modules/coder/agent-firewall";
+const CONFIG_PATH = `${MODULE_DIR}/config/config.yaml`;
+const WRAPPER_PATH = `${MODULE_DIR}/scripts/agent-firewall-wrapper.sh`;
+
+const setup = async (
+  props?: SetupProps,
+): Promise<{ id: string; coderEnvVars: Record<string, string> }> => {
+  const state = await runTerraformApply(import.meta.dir, {
+    agent_id: "foo",
+    ...props?.moduleVariables,
+  });
+
+  const coderEnvVars = extractCoderEnvVars(state);
+  const id = await runContainer("codercom/enterprise-node:latest");
+  registerCleanup(async () => {
+    await removeContainer(id);
+  });
+
+  await execContainer(id, ["bash", "-c", "mkdir -p /home/coder/project"]);
+
+  // Create a mock coder binary with boundary subcommand and exp sync support
+  if (!props?.skipCoderMock) {
+    await writeExecutable({
+      containerId: id,
+      filePath: "/usr/bin/coder",
+      content: await loadTestFile(import.meta.dir, "coder-mock.sh"),
+    });
+  }
+
+  // Extract ALL coder_scripts from the state (coder-utils creates multiple)
+  const allScripts = state.resources
+    .filter((r) => r.type === "coder_script")
+    .map((r) => ({
+      name: r.name,
+      script: r.instances[0].attributes.script as string,
+    }));
+
+  // Run scripts in lifecycle order
+  const executionOrder = [
+    "pre_install_script",
+    "install_script",
+    "post_install_script",
+  ];
+  const orderedScripts = executionOrder
+    .map((name) => allScripts.find((s) => s.name === name))
+    .filter((s): s is NonNullable<typeof s> => s != null);
+
+  // Write each script individually and create a combined runner
+  const scriptPaths: string[] = [];
+  for (const s of orderedScripts) {
+    const scriptPath = `/home/coder/${s.name}.sh`;
+    await writeExecutable({
+      containerId: id,
+      filePath: scriptPath,
+      content: s.script,
+    });
+    scriptPaths.push(scriptPath);
+  }
+
+  const combinedScript = [
+    "#!/bin/bash",
+    "set -o errexit",
+    "set -o pipefail",
+    ...scriptPaths.map((p) => `bash "${p}"`),
+  ].join("\n");
+
+  await writeExecutable({
+    containerId: id,
+    filePath: "/home/coder/script.sh",
+    content: combinedScript,
+  });
+
+  return { id, coderEnvVars };
+};
+
+setDefaultTimeout(60 * 1000);
+
+describe("agent-firewall", async () => {
+  beforeAll(async () => {
+    await runTerraformInit(import.meta.dir);
+  });
+
+  testRequiredVariables(import.meta.dir, {
+    agent_id: "test-agent-id",
+  });
+
+  test("terraform-state-basic", async () => {
+    const state = await runTerraformApply(import.meta.dir, {
+      agent_id: "test-agent-id",
+    });
+
+    const resources = state.resources;
+
+    // No coder_env resources should exist
+    const envResources = resources.filter((r) => r.type === "coder_env");
+    expect(envResources).toHaveLength(0);
+
+    // Verify no env vars are exported
+    const coderEnvVars = extractCoderEnvVars(state);
+    expect(coderEnvVars["BOUNDARY_WRAPPER_PATH"]).toBeUndefined();
+    expect(coderEnvVars["BOUNDARY_CONFIG"]).toBeUndefined();
+
+    // Verify agent_firewall_config_path output
+    expect(state.outputs["agent_firewall_config_path"]?.value).toBe(
+      "$HOME/.coder-modules/coder/agent-firewall/config/config.yaml",
+    );
+
+    // Verify agent_firewall_wrapper_path output
+    expect(state.outputs["agent_firewall_wrapper_path"]?.value).toBe(
+      "$HOME/.coder-modules/coder/agent-firewall/scripts/agent-firewall-wrapper.sh",
+    );
+
+    // Verify scripts output contains install script
+    const scripts = state.outputs["scripts"]?.value as string[];
+    expect(scripts).toContain("coder-agent-firewall-install_script");
+  });
+
+  test("terraform-state-custom-module-directory", async () => {
+    const customDir = "$HOME/.coder-modules/custom/agent-firewall";
+    const state = await runTerraformApply(import.meta.dir, {
+      agent_id: "test-agent-id",
+      module_directory: customDir,
+    });
+
+    // Verify output uses custom dir
+    const outputs = state.outputs;
+    expect(outputs["agent_firewall_wrapper_path"]?.value).toBe(
+      `${customDir}/scripts/agent-firewall-wrapper.sh`,
+    );
+    // Config path follows module directory
+    expect(outputs["agent_firewall_config_path"]?.value).toBe(
+      `${customDir}/config/config.yaml`,
+    );
+  });
+
+  test("terraform-state-inline-config", async () => {
+    const inlineConfig =
+      "allowlist:\n  - domain=example.com\nlog_level: debug\n";
+    const state = await runTerraformApply(import.meta.dir, {
+      agent_id: "test-agent-id",
+      agent_firewall_config: inlineConfig,
+    });
+
+    // Inline config still writes to the managed path.
+    expect(state.outputs["agent_firewall_config_path"]?.value).toBe(
+      "$HOME/.coder-modules/coder/agent-firewall/config/config.yaml",
+    );
+  });
+
+  test("terraform-state-config-path", async () => {
+    const state = await runTerraformApply(import.meta.dir, {
+      agent_id: "test-agent-id",
+      agent_firewall_config_path: "/workspace/my-config.yaml",
+    });
+
+    // agent_firewall_config_path output should point to the user-provided path.
+    expect(state.outputs["agent_firewall_config_path"]?.value).toBe(
+      "/workspace/my-config.yaml",
+    );
+  });
+
+  test("happy-path-coder-subcommand", async () => {
+    const { id } = await setup();
+    await execModuleScript(id);
+
+    // Verify the wrapper script was created
+    const wrapperContent = await readFileContainer(id, WRAPPER_PATH);
+    expect(wrapperContent).toContain("#!/usr/bin/env bash");
+    expect(wrapperContent).toContain("coder-no-caps");
+    expect(wrapperContent).toContain("boundary");
+
+    // Verify the wrapper script is executable
+    const statResult = await execContainer(id, [
+      "stat",
+      "-c",
+      "%a",
+      WRAPPER_PATH,
+    ]);
+    expect(statResult.stdout.trim()).toMatch(/7[0-9][0-9]/);
+
+    // Verify coder-no-caps binary was created
+    const coderNoCapsResult = await execContainer(id, [
+      "test",
+      "-f",
+      `${MODULE_DIR}/scripts/coder-no-caps`,
+    ]);
+    expect(coderNoCapsResult.exitCode).toBe(0);
+
+    // Verify default boundary config was written inside module directory
+    const configContent = await readFileContainer(id, CONFIG_PATH);
+    expect(configContent).toContain("allowlist:");
+    expect(configContent).toContain("domain=api.anthropic.com");
+    expect(configContent).toContain("domain=api.openai.com");
+    expect(configContent).toContain("proxy_port: 8087");
+
+    // Verify Coder domain was auto-filled from data.coder_workspace.me
+    // (the placeholder should be replaced with the actual deployment domain).
+    expect(configContent).not.toContain("domain=your-deployment.coder.com");
+
+    // Verify $HOME was expanded in log_dir (should be absolute, not literal $HOME).
+    expect(configContent).toContain("log_dir: /home/coder/");
+    expect(configContent).not.toContain("$HOME");
+
+    // Check install log
+    const installLog = await readFileContainer(
+      id,
+      `${MODULE_DIR}/logs/install.log`,
+    );
+    expect(installLog).toContain("Using coder boundary subcommand");
+    expect(installLog).toContain("Boundary config written to");
+    expect(installLog).toContain("boundary wrapper configured");
+  });
+
+  test("inline-config-written", async () => {
+    const customConfig =
+      "allowlist:\n  - domain=custom.example.com\nlog_level: info\n";
+    const { id } = await setup({
+      moduleVariables: {
+        agent_firewall_config: customConfig,
+      },
+    });
+    await execModuleScript(id);
+
+    // Verify the inline config was written
+    const configContent = await readFileContainer(id, CONFIG_PATH);
+    expect(configContent).toContain("domain=custom.example.com");
+    expect(configContent).toContain("log_level: info");
+  });
+
+  test("config-path-skips-write", async () => {
+    const { id } = await setup({
+      moduleVariables: {
+        agent_firewall_config_path: "/workspace/external-config.yaml",
+      },
+    });
+    await execModuleScript(id);
+
+    // Verify NO config was written to the default path
+    const checkResult = await execContainer(id, ["test", "-f", CONFIG_PATH]);
+    expect(checkResult.exitCode).not.toBe(0);
+
+    // Check install log confirms skip
+    const installLog = await readFileContainer(
+      id,
+      `${MODULE_DIR}/logs/install.log`,
+    );
+    expect(installLog).toContain(
+      "Using external boundary config, skipping config write",
+    );
+  });
+
+  // Note: Tests for use_agent_firewall_directly and
+  // compile_agent_firewall_from_source are skipped because they require
+  // network access (downloading boundary) or compilation which are too
+  // slow for unit tests. These modes are tested manually.
+
+  test("custom-hooks", async () => {
+    const preInstallMarker = "pre-install-executed";
+    const postInstallMarker = "post-install-executed";
+
+    const { id } = await setup({
+      moduleVariables: {
+        pre_install_script: `#!/bin/bash\necho '${preInstallMarker}'`,
+        post_install_script: `#!/bin/bash\necho '${postInstallMarker}'`,
+      },
+    });
+    await execModuleScript(id);
+
+    // Verify pre-install script ran
+    const preInstallLog = await readFileContainer(
+      id,
+      `${MODULE_DIR}/logs/pre_install.log`,
+    );
+    expect(preInstallLog).toContain(preInstallMarker);
+
+    // Verify post-install script ran
+    const postInstallLog = await readFileContainer(
+      id,
+      `${MODULE_DIR}/logs/post_install.log`,
+    );
+    expect(postInstallLog).toContain(postInstallMarker);
+
+    // Verify main install still ran
+    const installLog = await readFileContainer(
+      id,
+      `${MODULE_DIR}/logs/install.log`,
+    );
+    expect(installLog).toContain("boundary wrapper configured");
+  });
+
+  test("no-env-vars", async () => {
+    const { coderEnvVars } = await setup();
+
+    // No env vars should be exported by this module.
+    expect(coderEnvVars["BOUNDARY_WRAPPER_PATH"]).toBeUndefined();
+    expect(coderEnvVars["BOUNDARY_CONFIG"]).toBeUndefined();
+  });
+
+  test("wrapper-script-execution", async () => {
+    const { id } = await setup();
+    await execModuleScript(id);
+
+    // Try executing the wrapper script with a command
+    const wrapperResult = await execContainer(id, [
+      "bash",
+      "-c",
+      `${WRAPPER_PATH} echo boundary-test`,
+    ]);
+
+    // The wrapper passes the command directly to the boundary command
+    expect(wrapperResult.stdout).toContain("boundary-test");
+  });
+
+  test("installation-idempotency", async () => {
+    const { id } = await setup();
+
+    // Run the installation twice
+    await execModuleScript(id);
+    const firstInstallLog = await readFileContainer(
+      id,
+      `${MODULE_DIR}/logs/install.log`,
+    );
+
+    // Run again
+    const secondRun = await execModuleScript(id);
+    expect(secondRun.exitCode).toBe(0);
+
+    // Both runs should succeed
+    expect(firstInstallLog).toContain("boundary wrapper configured");
+  });
+});

registry/coder/modules/agent-firewall/main.tf

@@ -0,0 +1,128 @@
+terraform {
+  required_version = ">= 1.9"
+
+  required_providers {
+    coder = {
+      source  = "coder/coder"
+      version = ">= 2.5"
+    }
+  }
+}
+
+data "coder_workspace" "me" {}
+
+variable "agent_id" {
+  type        = string
+  description = "The ID of a Coder agent."
+}
+
+variable "agent_firewall_version" {
+  type        = string
+  description = "Agent firewall version. When use_agent_firewall_directly is true, a release version should be provided or 'latest' for the latest release. When compile_agent_firewall_from_source is true, a valid git reference should be provided (tag, commit, branch)."
+  default     = "latest"
+}
+
+variable "compile_agent_firewall_from_source" {
+  type        = bool
+  description = "Whether to compile agent-firewall from source instead of using the official install script."
+  default     = false
+}
+
+variable "use_agent_firewall_directly" {
+  type        = bool
+  description = "Whether to use agent-firewall binary directly instead of `coder boundary` subcommand. When false (default), uses `coder boundary` subcommand. When true, installs and uses agent-firewall binary from release."
+  default     = false
+}
+
+variable "agent_firewall_config" {
+  type        = string
+  description = "Inline agent-firewall configuration content (YAML). Overrides the module's default config. Mutually exclusive with agent_firewall_config_path."
+  default     = null
+
+  validation {
+    condition     = !(var.agent_firewall_config != null && var.agent_firewall_config_path != null)
+    error_message = "Only one of agent_firewall_config or agent_firewall_config_path may be set."
+  }
+}
+
+variable "agent_firewall_config_path" {
+  type        = string
+  description = "Path to an existing agent-firewall config file in the workspace. When set, no config is written and the agent_firewall_config_path output points to this path. Mutually exclusive with agent_firewall_config."
+  default     = null
+}
+
+variable "pre_install_script" {
+  type        = string
+  description = "Custom script to run before installing agent-firewall."
+  default     = null
+}
+
+variable "post_install_script" {
+  type        = string
+  description = "Custom script to run after installing agent-firewall."
+  default     = null
+}
+
+variable "module_directory" {
+  type        = string
+  description = "Directory where the agent-firewall module scripts will be located. Default is $HOME/.coder-modules/coder/agent-firewall."
+  default     = "$HOME/.coder-modules/coder/agent-firewall"
+}
+
+locals {
+  boundary_wrapper_path = "${var.module_directory}/scripts/agent-firewall-wrapper.sh"
+
+  # Extract domain from the Coder access URL for the default config
+  # allowlist (e.g., "https://dev.coder.com/" -> "dev.coder.com").
+  coder_domain = try(regex("^https?://([^/:]+)", data.coder_workspace.me.access_url)[0], "")
+
+  # Config handling: resolve which config content to write and where
+  # agent_firewall_config_path output points to.
+  default_boundary_config = templatefile("${path.module}/config.yaml.tftpl", {
+    CODER_DOMAIN     = local.coder_domain
+    BOUNDARY_LOG_DIR = "${var.module_directory}/logs/agent_firewall_logs"
+  })
+  boundary_config_content        = var.agent_firewall_config != null ? var.agent_firewall_config : local.default_boundary_config
+  boundary_config_dir            = "${var.module_directory}/config"
+  boundary_config_file_path      = "${local.boundary_config_dir}/config.yaml"
+  effective_boundary_config_path = var.agent_firewall_config_path != null ? var.agent_firewall_config_path : local.boundary_config_file_path
+  write_boundary_config          = var.agent_firewall_config_path == null
+
+  install_script = templatefile("${path.module}/scripts/install.sh.tftpl", {
+    BOUNDARY_VERSION             = var.agent_firewall_version
+    COMPILE_BOUNDARY_FROM_SOURCE = tostring(var.compile_agent_firewall_from_source)
+    USE_BOUNDARY_DIRECTLY        = tostring(var.use_agent_firewall_directly)
+    MODULE_DIR                   = var.module_directory
+    BOUNDARY_WRAPPER_PATH        = local.boundary_wrapper_path
+    WRITE_BOUNDARY_CONFIG        = tostring(local.write_boundary_config)
+    BOUNDARY_CONFIG_CONTENT_B64  = local.write_boundary_config ? base64encode(local.boundary_config_content) : ""
+    BOUNDARY_CONFIG_DIR          = local.boundary_config_dir
+    BOUNDARY_CONFIG_FILE         = local.boundary_config_file_path
+  })
+}
+
+module "coder_utils" {
+  source              = "registry.coder.com/coder/coder-utils/coder"
+  version             = "0.0.1"
+  agent_id            = var.agent_id
+  display_name_prefix = "Agent Firewall"
+  module_directory    = var.module_directory
+  pre_install_script  = var.pre_install_script
+  post_install_script = var.post_install_script
+  install_script      = local.install_script
+}
+
+output "agent_firewall_wrapper_path" {
+  description = "Path to the agent-firewall wrapper script."
+  value       = local.boundary_wrapper_path
+}
+
+output "agent_firewall_config_path" {
+  description = "Effective path to the agent-firewall config file."
+  value       = local.effective_boundary_config_path
+}
+
+output "scripts" {
+  description = "List of script names for coder exp sync coordination."
+  value       = module.coder_utils.scripts
+}

registry/coder/modules/agent-firewall/scripts/install.sh.tftpl

@@ -0,0 +1,131 @@
+#!/bin/bash
+# Sets up boundary for network isolation in Coder workspaces.
+
+set -euo pipefail
+
+BOUNDARY_VERSION='${BOUNDARY_VERSION}'
+COMPILE_BOUNDARY_FROM_SOURCE='${COMPILE_BOUNDARY_FROM_SOURCE}'
+USE_BOUNDARY_DIRECTLY='${USE_BOUNDARY_DIRECTLY}'
+MODULE_DIR="${MODULE_DIR}"
+BOUNDARY_WRAPPER_PATH="${BOUNDARY_WRAPPER_PATH}"
+WRITE_BOUNDARY_CONFIG='${WRITE_BOUNDARY_CONFIG}'
+BOUNDARY_CONFIG_CONTENT=$(echo -n '${BOUNDARY_CONFIG_CONTENT_B64}' | base64 -d | sed "s|\$HOME|$HOME|g")
+BOUNDARY_CONFIG_DIR="${BOUNDARY_CONFIG_DIR}"
+BOUNDARY_CONFIG_FILE="${BOUNDARY_CONFIG_FILE}"
+
+printf "BOUNDARY_VERSION: %s\n" "$${BOUNDARY_VERSION}"
+printf "COMPILE_BOUNDARY_FROM_SOURCE: %s\n" "$${COMPILE_BOUNDARY_FROM_SOURCE}"
+printf "USE_BOUNDARY_DIRECTLY: %s\n" "$${USE_BOUNDARY_DIRECTLY}"
+printf "MODULE_DIR: %s\n" "$${MODULE_DIR}"
+printf "BOUNDARY_WRAPPER_PATH: %s\n" "$${BOUNDARY_WRAPPER_PATH}"
+printf "WRITE_BOUNDARY_CONFIG: %s\n" "$${WRITE_BOUNDARY_CONFIG}"
+printf "BOUNDARY_CONFIG_DIR: %s\n" "$${BOUNDARY_CONFIG_DIR}"
+printf "BOUNDARY_CONFIG_FILE: %s\n" "$${BOUNDARY_CONFIG_FILE}"
+
+validate_boundary_subcommand() {
+  if ! command -v coder > /dev/null 2>&1; then
+    echo "Error: 'coder' command not found. boundary cannot be enabled." >&2
+    exit 1
+  fi
+
+  local output
+  echo "Checking for license"
+  if ! output=$(coder boundary 2>&1); then
+    if echo "$${output}" | grep -qi "license is not entitled"; then
+      echo "Error: your Coder deployment is not licensed for the boundary feature." >&2
+      echo "$${output}" >&2
+      echo "" >&2
+      exit 1
+    fi
+  fi
+}
+
+# Install boundary binary if needed.
+# Uses one of three strategies:
+#   1. Compile from source (compile_boundary_from_source=true)
+#   2. Install from release (use_boundary_directly=true)
+#   3. Use coder boundary subcommand (default, no installation needed)
+install_boundary() {
+  if [[ "$${COMPILE_BOUNDARY_FROM_SOURCE}" = "true" ]]; then
+    echo "Compiling boundary from source (version: $${BOUNDARY_VERSION})"
+
+    # Remove existing boundary directory to allow re-running safely
+    if [[ -d boundary ]]; then
+      rm -rf boundary
+    fi
+
+    echo "Cloning boundary repository"
+    git clone https://github.com/coder/boundary.git
+    cd boundary || exit 1
+    git checkout "$${BOUNDARY_VERSION}"
+
+    make build
+
+    sudo cp boundary /usr/local/bin/
+    sudo chmod +x /usr/local/bin/boundary
+    cd - || exit 1
+  elif [[ "$${USE_BOUNDARY_DIRECTLY}" = "true" ]]; then
+    echo "Installing boundary using official install script (version: $${BOUNDARY_VERSION})"
+    curl -fsSL https://raw.githubusercontent.com/coder/boundary/main/install.sh | bash -s -- --version "$${BOUNDARY_VERSION}"
+  else
+    validate_boundary_subcommand
+    echo "Using coder boundary subcommand (provided by Coder)"
+  fi
+}
+
+# Write boundary config file if the module is responsible for it.
+write_boundary_config() {
+  if [[ "$${WRITE_BOUNDARY_CONFIG}" != "true" ]]; then
+    echo "Using external boundary config, skipping config write."
+    return 0
+  fi
+
+  mkdir -p "$${BOUNDARY_CONFIG_DIR}"
+  echo "$${BOUNDARY_CONFIG_CONTENT}" > "$${BOUNDARY_CONFIG_FILE}"
+  echo "Boundary config written to $${BOUNDARY_CONFIG_FILE}"
+}
+
+# Set up boundary: install, write config, create wrapper script.
+setup_boundary() {
+  echo "Setting up coder boundary..."
+
+  # Install boundary binary if needed
+  install_boundary
+
+  # Write boundary config
+  write_boundary_config
+
+  # Ensure the wrapper script directory exists.
+  mkdir -p "$(dirname "$${BOUNDARY_WRAPPER_PATH}")"
+
+  if [[ "$${COMPILE_BOUNDARY_FROM_SOURCE}" = "true" ]] || [[ "$${USE_BOUNDARY_DIRECTLY}" = "true" ]]; then
+    # Use boundary binary directly (from compilation or release installation)
+    cat > "$${BOUNDARY_WRAPPER_PATH}" << 'WRAPPER_EOF'
+#!/usr/bin/env bash
+set -euo pipefail
+exec boundary "$@"
+WRAPPER_EOF
+  else
+    # Use coder boundary subcommand (default)
+    # Copy coder binary to strip CAP_NET_ADMIN capabilities.
+    # This is necessary because boundary doesn't work with privileged binaries
+    # (you can't launch privileged binaries inside network namespaces unless
+    # you have sys_admin).
+    CODER_NO_CAPS="$${MODULE_DIR}/scripts/coder-no-caps"
+    if ! cp "$(command -v coder)" "$${CODER_NO_CAPS}"; then
+      echo "Error: Failed to copy coder binary to $${CODER_NO_CAPS}. boundary cannot be enabled." >&2
+      exit 1
+    fi
+    cat > "$${BOUNDARY_WRAPPER_PATH}" << 'WRAPPER_EOF'
+#!/usr/bin/env bash
+set -euo pipefail
+SCRIPT_DIR="$(cd "$(dirname "$${BASH_SOURCE[0]}")" && pwd)"
+exec "$${SCRIPT_DIR}/coder-no-caps" boundary "$@"
+WRAPPER_EOF
+  fi
+
+  chmod +x "$${BOUNDARY_WRAPPER_PATH}"
+  echo "boundary wrapper configured: $${BOUNDARY_WRAPPER_PATH}"
+}
+
+setup_boundary

registry/coder/modules/agent-firewall/testdata/coder-mock.sh

@@ -0,0 +1,38 @@
+#!/bin/bash
+
+# Mock coder command for testing boundary module
+# Handles: coder boundary [--help | <command>]
+# Handles: coder exp sync [want|start|complete] (no-op for testing)
+
+# Handle exp sync commands (no-op for testing)
+if [[ "$1" == "exp" ]] && [[ "$2" == "sync" ]]; then
+  exit 0
+fi
+
+if [[ "$1" == "boundary" ]]; then
+  shift
+
+  # Handle --help flag
+  if [[ "$1" == "--help" ]]; then
+    cat << 'EOF'
+boundary - Run commands in network isolation
+
+Usage:
+  coder boundary [flags] -- <command> [args...]
+
+Examples:
+  coder boundary -- curl https://example.com
+  coder boundary -- npm install
+
+Flags:
+  -h, --help   help for boundary
+EOF
+    exit 0
+  fi
+
+  # Execute the remaining arguments as a command
+  exec "$@"
+fi
+
+echo "Mock coder: Unknown command: $*"
+exit 1

registry/coder/modules/claude-code/README.md

@@ -13,7 +13,7 @@ Install and configure the [Claude Code](https://docs.anthropic.com/en/docs/agent
 ```tf
 module "claude-code" {
   source            = "registry.coder.com/coder/claude-code/coder"
-  version           = "5.1.0"
+  version           = "5.2.0"
   agent_id          = coder_agent.main.id
   anthropic_api_key = "xxxx-xxxxx-xxxx"
 }
@@ -47,7 +47,7 @@ locals {
 
 module "claude-code" {
   source            = "registry.coder.com/coder/claude-code/coder"
-  version           = "5.1.0"
+  version           = "5.2.0"
   agent_id          = coder_agent.main.id
   workdir           = local.claude_workdir
   anthropic_api_key = "xxxx-xxxxx-xxxx"
@@ -78,7 +78,7 @@ resource "coder_app" "claude" {
 ```tf
 module "claude-code" {
   source            = "registry.coder.com/coder/claude-code/coder"
-  version           = "5.1.0"
+  version           = "5.2.0"
   agent_id          = coder_agent.main.id
   workdir           = "/home/coder/project"
   enable_ai_gateway = true
@@ -95,6 +95,33 @@ Claude Code then routes API requests through Coder's AI Gateway instead of direc
 > [!CAUTION]
 > `enable_ai_gateway = true` is mutually exclusive with `anthropic_api_key` and `claude_code_oauth_token`. Setting any of them together fails at plan time.
 
+### Enterprise policy via managed settings
+
+The `managed_settings` input writes a policy file to `/etc/claude-code/managed-settings.d/10-coder.json` inside the workspace. Claude Code reads this directory at startup with the highest configuration precedence, so users cannot override these values in their own `~/.claude/settings.json`. This is a local file mechanism and works with any inference backend (Anthropic API, AWS Bedrock, Google Vertex AI, or AI Gateway).
+
+```tf
+module "claude-code" {
+  source            = "registry.coder.com/coder/claude-code/coder"
+  version           = "5.2.0"
+  agent_id          = coder_agent.main.id
+  workdir           = "/home/coder/project"
+  anthropic_api_key = "xxxx-xxxxx-xxxx"
+
+  managed_settings = {
+    permissions = {
+      defaultMode                  = "acceptEdits"
+      disableBypassPermissionsMode = "disable"
+      deny                         = ["Bash(curl:*)", "Bash(wget:*)", "WebFetch"]
+    }
+    env = {
+      DISABLE_TELEMETRY = "0"
+    }
+  }
+}
+```
+
+See the [Claude Code settings reference](https://docs.anthropic.com/en/docs/claude-code/settings) for the full schema. Common keys: `permissions` (`defaultMode`, `allow`, `deny`, `disableBypassPermissionsMode`, `additionalDirectories`), `env`, `model`, `apiKeyHelper`, `hooks`, `cleanupPeriodDays`.
+
 ### Advanced Configuration
 
 This example shows version pinning, a pre-installed binary path, a custom model, and MCP servers.
@@ -102,7 +129,7 @@ This example shows version pinning, a pre-installed binary path, a custom model,
 ```tf
 module "claude-code" {
   source   = "registry.coder.com/coder/claude-code/coder"
-  version  = "5.1.0"
+  version  = "5.2.0"
   agent_id = coder_agent.main.id
   workdir  = "/home/coder/project"
 
@@ -166,7 +193,7 @@ Downstream `coder_script` resources can wait for this module's install pipeline
 ```tf
 module "claude-code" {
   source            = "registry.coder.com/coder/claude-code/coder"
-  version           = "5.1.0"
+  version           = "5.2.0"
   agent_id          = coder_agent.main.id
   workdir           = "/home/coder/project"
   anthropic_api_key = "xxxx-xxxxx-xxxx"
@@ -252,7 +279,7 @@ resource "coder_env" "bedrock_api_key" {
 
 module "claude-code" {
   source   = "registry.coder.com/coder/claude-code/coder"
-  version  = "5.1.0"
+  version  = "5.2.0"
   agent_id = coder_agent.main.id
   workdir  = "/home/coder/project"
   model    = "global.anthropic.claude-sonnet-4-5-20250929-v1:0"
@@ -309,7 +336,7 @@ resource "coder_env" "google_application_credentials" {
 
 module "claude-code" {
   source   = "registry.coder.com/coder/claude-code/coder"
-  version  = "5.1.0"
+  version  = "5.2.0"
   agent_id = coder_agent.main.id
   workdir  = "/home/coder/project"
   model    = "claude-sonnet-4@20250514"
@@ -350,7 +377,7 @@ The module automatically tags every span and metric with `coder.workspace_id`, `
 ```tf
 module "claude-code" {
   source            = "registry.coder.com/coder/claude-code/coder"
-  version           = "5.1.0"
+  version           = "5.2.0"
   agent_id          = coder_agent.main.id
   workdir           = "/home/coder/project"
   anthropic_api_key = "xxxx-xxxxx-xxxx"

registry/coder/modules/claude-code/main.test.ts

@@ -382,10 +382,13 @@ describe("claude-code", async () => {
     const parsed = JSON.parse(claudeConfig);
     expect(parsed.autoUpdaterStatus).toBe("disabled");
     expect(parsed.hasCompletedOnboarding).toBe(true);
-    expect(parsed.bypassPermissionsModeAccepted).toBe(true);
     expect(parsed.hasAcknowledgedCostThreshold).toBe(true);
     expect(parsed.projects[workdir].hasCompletedProjectOnboarding).toBe(true);
     expect(parsed.projects[workdir].hasTrustDialogAccepted).toBe(true);
+    // Permission posture is delivered via /etc/claude-code/managed-settings.d/,
+    // not user-writable ~/.claude.json acceptance flags.
+    expect(parsed.bypassPermissionsModeAccepted).toBeUndefined();
+    expect(parsed.autoModeAccepted).toBeUndefined();
   });
 
   test("standalone-mode-with-oauth-token", async () => {
@@ -413,7 +416,7 @@ describe("claude-code", async () => {
     );
     const parsed = JSON.parse(claudeConfig);
     expect(parsed.hasCompletedOnboarding).toBe(true);
-    expect(parsed.bypassPermissionsModeAccepted).toBe(true);
+    expect(parsed.bypassPermissionsModeAccepted).toBeUndefined();
   });
 
   test("standalone-mode-no-auth", async () => {
@@ -436,6 +439,49 @@ describe("claude-code", async () => {
     expect(resp.stdout.trim()).toBe("ABSENT");
   });
 
+  test("claude-managed-settings-written", async () => {
+    const { id, scripts } = await setup({
+      moduleVariables: {
+        managed_settings: JSON.stringify({
+          permissions: {
+            defaultMode: "acceptEdits",
+            disableBypassPermissionsMode: "disable",
+            deny: ["Bash(rm -rf*)"],
+          },
+        }),
+      },
+    });
+    await runScripts(id, scripts);
+
+    const policy = await execContainer(id, [
+      "bash",
+      "-c",
+      "cat /etc/claude-code/managed-settings.d/10-coder.json",
+    ]);
+    expect(policy.exitCode).toBe(0);
+    expect(policy.stdout).toContain('"defaultMode":"acceptEdits"');
+    expect(policy.stdout).toContain('"disableBypassPermissionsMode":"disable"');
+    expect(policy.stdout).toContain('"deny":["Bash(rm -rf*)"]');
+
+    const installLog = await readFileContainer(
+      id,
+      "/home/coder/.coder-modules/coder/claude-code/logs/install.log",
+    );
+    expect(installLog).toContain("Wrote Claude Code managed settings");
+  });
+
+  test("claude-managed-settings-not-set", async () => {
+    const { id, scripts } = await setup();
+    await runScripts(id, scripts);
+
+    const resp = await execContainer(id, [
+      "bash",
+      "-c",
+      "test -e /etc/claude-code/managed-settings.d/10-coder.json && echo EXISTS || echo ABSENT",
+    ]);
+    expect(resp.stdout.trim()).toBe("ABSENT");
+  });
+
   test("telemetry-otel", async () => {
     const { coderEnvVars } = await setup({
       moduleVariables: {

registry/coder/modules/claude-code/main.tf

@@ -102,6 +102,12 @@ variable "claude_binary_path" {
   }
 }
 
+variable "managed_settings" {
+  type        = any
+  description = "Policy settings written to /etc/claude-code/managed-settings.d/10-coder.json. Highest-precedence client config; works with any inference backend (Anthropic API, Bedrock, Vertex, AI Gateway). See https://docs.anthropic.com/en/docs/claude-code/settings for the schema."
+  default     = null
+}
+
 variable "enable_ai_gateway" {
   type        = bool
   description = "Use AI Gateway for Claude Code. https://coder.com/docs/ai-coder/ai-gateway"
@@ -237,6 +243,7 @@ locals {
     ARG_MCP                    = var.mcp != "" ? base64encode(var.mcp) : ""
     ARG_MCP_CONFIG_REMOTE_PATH = base64encode(jsonencode(var.mcp_config_remote_path))
     ARG_ENABLE_AI_GATEWAY      = tostring(var.enable_ai_gateway)
+    ARG_MANAGED_SETTINGS_JSON  = var.managed_settings != null ? base64encode(jsonencode(var.managed_settings)) : ""
   })
   module_dir_name = ".coder-modules/coder/claude-code"
 }

registry/coder/modules/claude-code/main.tftest.hcl

@@ -283,3 +283,47 @@ run "test_workdir_optional" {
     error_message = "workdir should default to null when omitted"
   }
 }
+
+run "test_managed_settings" {
+  command = plan
+
+  variables {
+    agent_id = "test-agent-managed-settings"
+    workdir  = "/home/coder/project"
+    managed_settings = {
+      permissions = {
+        defaultMode                  = "acceptEdits"
+        disableBypassPermissionsMode = "disable"
+        deny                         = ["Bash(rm -rf*)"]
+      }
+    }
+  }
+
+  assert {
+    condition     = var.managed_settings.permissions.defaultMode == "acceptEdits"
+    error_message = "managed_settings should accept the permissions object"
+  }
+
+  assert {
+    condition     = strcontains(local.install_script, "/etc/claude-code/managed-settings.d")
+    error_message = "install script should reference the managed-settings.d drop-in directory"
+  }
+
+  assert {
+    condition     = strcontains(local.install_script, base64encode(jsonencode(var.managed_settings)))
+    error_message = "install script should embed the base64-encoded managed_settings JSON"
+  }
+}
+
+run "test_managed_settings_default_null" {
+  command = plan
+
+  variables {
+    agent_id = "test-agent-managed-settings-default"
+  }
+
+  assert {
+    condition     = var.managed_settings == null
+    error_message = "managed_settings should default to null when omitted"
+  }
+}

registry/coder/modules/claude-code/scripts/install.sh.tftpl

@@ -17,6 +17,7 @@ ARG_CLAUDE_BINARY_PATH="$${ARG_CLAUDE_BINARY_PATH//\$HOME/$HOME}"
 ARG_MCP=$(echo -n '${ARG_MCP}' | base64 -d)
 ARG_MCP_CONFIG_REMOTE_PATH=$(echo -n '${ARG_MCP_CONFIG_REMOTE_PATH}' | base64 -d)
 ARG_ENABLE_AI_GATEWAY='${ARG_ENABLE_AI_GATEWAY}'
+ARG_MANAGED_SETTINGS_JSON=$(echo -n '${ARG_MANAGED_SETTINGS_JSON}' | base64 -d)
 
 export PATH="$${ARG_CLAUDE_BINARY_PATH}:$PATH"
 
@@ -29,6 +30,7 @@ printf "ARG_CLAUDE_BINARY_PATH: %s\n" "$${ARG_CLAUDE_BINARY_PATH}"
 printf "ARG_MCP: %s\n" "$${ARG_MCP}"
 printf "ARG_MCP_CONFIG_REMOTE_PATH: %s\n" "$${ARG_MCP_CONFIG_REMOTE_PATH}"
 printf "ARG_ENABLE_AI_GATEWAY: %s\n" "$${ARG_ENABLE_AI_GATEWAY}"
+printf "ARG_MANAGED_SETTINGS_JSON: %s\n" "$${ARG_MANAGED_SETTINGS_JSON}"
 
 echo "--------------------------------"
 
@@ -144,6 +146,32 @@ function setup_claude_configurations() {
 
 }
 
+function write_managed_settings() {
+  if [ -z "$${ARG_MANAGED_SETTINGS_JSON}" ]; then
+    return
+  fi
+
+  local dropin_dir="/etc/claude-code/managed-settings.d"
+  local target="$${dropin_dir}/10-coder.json"
+
+  if ! echo "$${ARG_MANAGED_SETTINGS_JSON}" | jq empty 2> /dev/null; then
+    echo "Warning: managed_settings is not valid JSON, skipping policy write"
+    return
+  fi
+
+  if command_exists sudo; then
+    sudo mkdir -p "$${dropin_dir}"
+    echo "$${ARG_MANAGED_SETTINGS_JSON}" | sudo tee "$${target}" > /dev/null
+    sudo chmod 0644 "$${target}"
+  else
+    mkdir -p "$${dropin_dir}"
+    echo "$${ARG_MANAGED_SETTINGS_JSON}" > "$${target}"
+    chmod 0644 "$${target}"
+  fi
+
+  echo "Wrote Claude Code managed settings to $${target}"
+}
+
 function configure_standalone_mode() {
   echo "Configuring Claude Code for standalone mode..."
 
@@ -158,8 +186,6 @@ function configure_standalone_mode() {
     echo "Updating existing Claude configuration at $${claude_config}"
 
     jq '.autoUpdaterStatus = "disabled" |
-        .autoModeAccepted = true |
-        .bypassPermissionsModeAccepted = true |
         .hasAcknowledgedCostThreshold = true |
         .hasCompletedOnboarding = true' \
       "$${claude_config}" > "$${claude_config}.tmp" && mv "$${claude_config}.tmp" "$${claude_config}"
@@ -168,8 +194,6 @@ function configure_standalone_mode() {
     cat > "$${claude_config}" << EOF
 {
   "autoUpdaterStatus": "disabled",
-  "autoModeAccepted": true,
-  "bypassPermissionsModeAccepted": true,
   "hasAcknowledgedCostThreshold": true,
   "hasCompletedOnboarding": true
 }
@@ -189,4 +213,5 @@ EOF
 
 install_claude_code_cli
 setup_claude_configurations
+write_managed_settings
 configure_standalone_mode

registry/coder/modules/git-clone/README.md

@@ -14,7 +14,7 @@ This module allows you to automatically clone a repository by URL and skip if it
 module "git-clone" {
   count    = data.coder_workspace.me.start_count
   source   = "registry.coder.com/coder/git-clone/coder"
-  version  = "1.2.3"
+  version  = "1.3.0"
   agent_id = coder_agent.example.id
   url      = "https://github.com/coder/coder"
 }
@@ -28,7 +28,7 @@ module "git-clone" {
 module "git-clone" {
   count    = data.coder_workspace.me.start_count
   source   = "registry.coder.com/coder/git-clone/coder"
-  version  = "1.2.3"
+  version  = "1.3.0"
   agent_id = coder_agent.example.id
   url      = "https://github.com/coder/coder"
   base_dir = "~/projects/coder"
@@ -43,7 +43,7 @@ To use with [Git Authentication](https://coder.com/docs/v2/latest/admin/git-prov
 module "git-clone" {
   count    = data.coder_workspace.me.start_count
   source   = "registry.coder.com/coder/git-clone/coder"
-  version  = "1.2.3"
+  version  = "1.3.0"
   agent_id = coder_agent.example.id
   url      = "https://github.com/coder/coder"
 }
@@ -70,7 +70,7 @@ data "coder_parameter" "git_repo" {
 module "git_clone" {
   count    = data.coder_workspace.me.start_count
   source   = "registry.coder.com/coder/git-clone/coder"
-  version  = "1.2.3"
+  version  = "1.3.0"
   agent_id = coder_agent.example.id
   url      = data.coder_parameter.git_repo.value
 }
@@ -105,7 +105,7 @@ Configuring `git-clone` for a self-hosted GitHub Enterprise Server running at `g
 module "git-clone" {
   count    = data.coder_workspace.me.start_count
   source   = "registry.coder.com/coder/git-clone/coder"
-  version  = "1.2.3"
+  version  = "1.3.0"
   agent_id = coder_agent.example.id
   url      = "https://github.example.com/coder/coder/tree/feat/example"
   git_providers = {
@@ -125,7 +125,7 @@ To GitLab clone with a specific branch like `feat/example`
 module "git-clone" {
   count    = data.coder_workspace.me.start_count
   source   = "registry.coder.com/coder/git-clone/coder"
-  version  = "1.2.3"
+  version  = "1.3.0"
   agent_id = coder_agent.example.id
   url      = "https://gitlab.com/coder/coder/-/tree/feat/example"
 }
@@ -137,7 +137,7 @@ Configuring `git-clone` for a self-hosted GitLab running at `gitlab.example.com`
 module "git-clone" {
   count    = data.coder_workspace.me.start_count
   source   = "registry.coder.com/coder/git-clone/coder"
-  version  = "1.2.3"
+  version  = "1.3.0"
   agent_id = coder_agent.example.id
   url      = "https://gitlab.example.com/coder/coder/-/tree/feat/example"
   git_providers = {
@@ -159,7 +159,7 @@ For example, to clone the `feat/example` branch:
 module "git-clone" {
   count       = data.coder_workspace.me.start_count
   source      = "registry.coder.com/coder/git-clone/coder"
-  version     = "1.2.3"
+  version     = "1.3.0"
   agent_id    = coder_agent.example.id
   url         = "https://github.com/coder/coder"
   branch_name = "feat/example"
@@ -177,7 +177,7 @@ For example, this will clone into the `~/projects/coder/coder-dev` folder:
 module "git-clone" {
   count       = data.coder_workspace.me.start_count
   source      = "registry.coder.com/coder/git-clone/coder"
-  version     = "1.2.3"
+  version     = "1.3.0"
   agent_id    = coder_agent.example.id
   url         = "https://github.com/coder/coder"
   folder_name = "coder-dev"
@@ -196,13 +196,36 @@ If not defined, the default, `0`, performs a full clone.
 module "git-clone" {
   count    = data.coder_workspace.me.start_count
   source   = "registry.coder.com/coder/git-clone/coder"
-  version  = "1.2.3"
+  version  = "1.3.0"
   agent_id = coder_agent.example.id
   url      = "https://github.com/coder/coder"
   depth    = 1
 }
 ```
 
+## Pre-clone script
+
+Run a custom script before cloning the repository by setting the `pre_clone_script` variable.
+This is useful for preparing the environment or validating prerequisites before cloning.
+
+```tf
+module "git-clone" {
+  count            = data.coder_workspace.me.start_count
+  source           = "registry.coder.com/coder/git-clone/coder"
+  version          = "1.3.0"
+  agent_id         = coder_agent.example.id
+  url              = "https://github.com/coder/coder"
+  pre_clone_script = <<-EOT
+    #!/bin/bash
+    echo "Preparing to clone repository..."
+    # Check prerequisites
+    command -v npm >/dev/null 2>&1 || { echo "npm is required but not installed."; exit 1; }
+    # Set up environment
+    export NODE_ENV=development
+  EOT
+}
+```
+
 ## Post-clone script
 
 Run a custom script after cloning the repository by setting the `post_clone_script` variable.
@@ -212,7 +235,7 @@ This is useful for running initialization tasks like installing dependencies or
 module "git-clone" {
   count             = data.coder_workspace.me.start_count
   source            = "registry.coder.com/coder/git-clone/coder"
-  version           = "1.2.3"
+  version           = "1.3.0"
   agent_id          = coder_agent.example.id
   url               = "https://github.com/coder/coder"
   post_clone_script = <<-EOT

registry/coder/modules/git-clone/main.test.ts

@@ -261,4 +261,16 @@ describe("git-clone", async () => {
     expect(output.stdout).toContain("Running post-clone script...");
     expect(output.stdout).toContain("Post-clone script executed");
   });
+
+  it("runs pre-clone script", async () => {
+    const state = await runTerraformApply(import.meta.dir, {
+      agent_id: "foo",
+      url: "fake-url",
+      pre_clone_script: "echo 'Pre-clone script executed'",
+    });
+    const output = await executeScriptInContainer(state, "alpine/git");
+    expect(output.stdout).toContain("Running pre-clone script...");
+    expect(output.stdout).toContain("Pre-clone script executed");
+    expect(output.stdout).toContain("Cloning fake-url to ~/fake-url...");
+  });
 });

registry/coder/modules/git-clone/main.tf

@@ -68,6 +68,12 @@ variable "post_clone_script" {
   default     = null
 }
 
+variable "pre_clone_script" {
+  description = "Custom script to run before cloning the repository. Runs before git clone, even if the repository already exists."
+  type        = string
+  default     = null
+}
+
 locals {
   # Remove query parameters and fragments from the URL
   url = replace(replace(var.url, "/\\?.*/", ""), "/#.*/", "")
@@ -89,6 +95,8 @@ locals {
   web_url = startswith(local.clone_url, "git@") ? replace(replace(local.clone_url, ":", "/"), "git@", "https://") : local.clone_url
   # Encode the post_clone_script for passing to the shell script
   encoded_post_clone_script = var.post_clone_script != null ? base64encode(var.post_clone_script) : ""
+  # Encode the pre_clone_script for passing to the shell script
+  encoded_pre_clone_script = var.pre_clone_script != null ? base64encode(var.pre_clone_script) : ""
 }
 
 output "repo_dir" {
@@ -129,6 +137,7 @@ resource "coder_script" "git_clone" {
     BRANCH_NAME : local.branch_name,
     DEPTH = var.depth,
     POST_CLONE_SCRIPT : local.encoded_post_clone_script,
+    PRE_CLONE_SCRIPT : local.encoded_pre_clone_script,
   })
   display_name       = "Git Clone"
   icon               = "/icon/git.svg"

registry/coder/modules/git-clone/run.sh

@@ -7,6 +7,7 @@ BRANCH_NAME="${BRANCH_NAME}"
 CLONE_PATH="$${CLONE_PATH/#\~/$${HOME}}"
 DEPTH="${DEPTH}"
 POST_CLONE_SCRIPT="${POST_CLONE_SCRIPT}"
+PRE_CLONE_SCRIPT="${PRE_CLONE_SCRIPT}"
 
 # Check if the variable is empty...
 if [ -z "$REPO_URL" ]; then
@@ -33,6 +34,16 @@ if [ ! -d "$CLONE_PATH" ]; then
   mkdir -p "$CLONE_PATH"
 fi
 
+# Run pre-clone script if provided
+if [ -n "$PRE_CLONE_SCRIPT" ]; then
+  echo "Running pre-clone script..."
+  PRE_CLONE_TMP=$(mktemp)
+  echo "$PRE_CLONE_SCRIPT" | base64 -d > "$PRE_CLONE_TMP"
+  chmod +x "$PRE_CLONE_TMP"
+  $PRE_CLONE_TMP
+  rm "$PRE_CLONE_TMP"
+fi
+
 # Check if the directory is empty
 # and if it is, clone the repo, otherwise skip cloning
 if [ -z "$(ls -A "$CLONE_PATH")" ]; then